- 5000 series, 14.2mm LEDs, set point display
- Relay, analog
- Choose Strain Gauge configuration on this page
- Other modules for AC or DC, Voltage current or resistance , frequency, and thermocouple and RTDs .
- Universal power supply 90-264VAC or 6-60VDC
- Display for Set Point Comparator
The A5000 is a modular panel meter system with a selection of input and output cards to suit your application. Choose from 18 different input modules. (this page shows only the strain gauge configuration) for AC, DC, Voltage and current, temperature, frequency, Select from 7 different output options, none, Hi/Lo set point, analog, RS232, RS485, or a combination. The multidisplay shows the reading and the set points but you can still use set points with single display – its just more convenient with the multiple display.
Specifications | |
Main Display | Red LED 14.2 mm high |
Sub Display | Green LED 8 mm high |
Conversion Rate | 12.5 /sec |
Maximum Display | 9999 |
Over-range indication | ‘OL’ LED flashes |
Zero Display | Leading “zero” suppression |
Decimal point | Set to any position |
External Control | Start/Hold, Peak Hold, Digital Zero |
Operating Temperature | 0~ 50° C, 35 – 85% RH |
Storage Temperature | -10 ~+70° C, < 60% RH |
Power Supply | AC 100 – 240 Volts (AC Main Unit) DC 9 – 60 V ) DC main unit ) |
Power Consumption | ~ 4VA (at 100 V) |
Dimensions mm | 96 x 48 x 147.5 |
Weight | 450 g |
Maximum Display | +/- 99999 ( 5 digits ) |
Decimal point | set to any position |
Dielectric strength AC | Power supply/ input terminal/ output terminal – AC 2000V 1minute Input terminal /output terminal – DC 500 V 1 minute Case/power supply/ input terminal/ output terminal – AC 2000 V 1 min. |
Dielectric strength DC | Power supply/ input terminal/ output terminal – DC 500V 1minute Input terminal /output terminal – DC 500 V 1 minute Case/power supply/ input terminal/ output terminal – AC 2000 V 1 min. |
Insulation resistance | DC 500V more than 100 MOhm at above terminals |